This listing is to make up a oak slab desk top from our kiln dried oak slab.
The first few photos shows the finished item, then some photos of it being made and the last photos are of the oak slab used.
These are well seasoned kiln dried French oak with a moisture content of around 12% The dimensions of this waney edge desktop are as follows;
This waney edge oak slab desktop will be around 2400 mm long.
The width will be around 450mm wide with a single waney edge and a single straight edge to go against the wall . The two end grain edges will also be straight cut.
This oak slab will finish off at around 40 mm thick and the final widths may vary slightly once the oak slab has been flattened off, shaped and sanded.
We will always endeavour to leave these oak slabs as thick as possible to keep the natural look of the oak slab.
These measurements are taken off of the shortest front face and may vary.
This oak slab desk tops will be delivered flattened and sanded to 180 grit. These are unfinished ready for you to add your own finish of your choice.
All you will need to do is apply a finish and final sanding onto the oak and add legs. We recommend applying at least 3 coats of finish onto these slabs, depending upon what you are using these may need more. We always recommend to not place any natural wide board oak directly near or close to a heat source or in wet areas.
Please note all timbers that I sell may have knots, shakes, saw marks, watermarks, cracks, bows, maybe cupped, and could have a small amount of woodworm. We always try to describe our timber to the best of our knowledge. Any wood work will be treated before delivery.
If you are local to Faversham then we would recommend that visit us to handpick the exact oak slab that will be used to create your finished piece of waney edge furniture.
Oak Slab Desk Top
These are covered by our 14 days return policy, please read our returns policy for our T&C.
These are all hand made to order and will normally be dispatched within 5 to 15 working days depending upon how busy we are.
Please note that we will post these as fast as we can.