This listing is to make up a bar top from our kiln dried character oak slab in the first few photos to look similar to the other examples of desk and tabletops that we have recently made like in the last picture.
These are well seasoned kiln dried French oak with a moisture content of around 9% The dimensions of this waney edge desktop are as follows;
This waney edge oak slab bartop will be 2m long.
The width will be between around 570mm to 600mm wide with two natural waney edges.
This oak slab will finish off at around 35 to 40 mm thick, we will always endeavour to leave these oak slabs as thick as possible to keep the natural look of the oak slab.
These measurements are taken off of the shortest front face and will vary depending upon what slab these are made from.
These waney edge oak slab bartops are all hand made to order so we can make these to the size and dimensions of your choice, you can even have a choice of matching or contrasting bowtie inlays or if you prefer just a plain oak slab without the bow ties. These oak slab desk tops will be posted out unfinished.
All you will need to do is apply a finish onto the oak and add legs. We recommend applying at least 3 coats of a finish onto these slabs, depending upon what you are using these may need more. We always recommend to not place any natural wide board oak directly near or close to a heat source or in wet areas.
Please note all timbers that I sell may have knots, shakes, saw marks, watermarks, cracks, bows, maybe cupped, and could have a small amount of woodworm. We always try to describe our timber to the best of our knowledge.
If you are local to Faversham then we would recommend that visit us to handpick the exact oak slab that will be used to create your finished piece of waney edge furniture.
Oak Slab Bar Top 2m Long
These are covered by our 14 days return policy, please read our returns policy for our T&C.
These are all hand made to order and will normally be dispatched within 10 to 15 working days depending upon how busy we are.
Please note that we will post these as fast as we can.