Bespoke oak waney edge table top made to order .
The first few photos shows the finished item, then some photos of it being made and the last photos are of the oak slab used.
This listing is For a custom made oak waney edge table top made out of our kiln dried oak slabs.
These are well seasoned kiln dried French oak with a moisture content of around 9%
The dimensions of this oak tabletop are as follows,
1700mm long .
Width 350 to 450 in the middle going to 470 at the end
These will end up between 35/40mm thick.
These measurements are taken off of the shortest front face.
These will be treated for any wood worm before posting.
this oak slab will be flattened and sanded and will have 3 little fish route red into the top at an agreed locations
These fish will be approximately 300 mm long and around 10 mm deep.
These will be posted out un finished , all you will need to do is apply a finish .
There will be a 10 working day lead time on dispatching this table top.
We recommend applying at least 3 coats of finish onto these oak slabs and seal all edges.
We always recommend to not place any natural wide board oak directly near or close to a heat source or in wet areas.
Please note all timbers that I sell may have knots, shakes, saw marks, watermarks, cracks, bows, maybe cupped, and could have a small amount of woodworm.
We always try to describe to the best of our knowledge, If your local to Faversham then welcome to come and view before you buy or ask me any questions.
Bespoke Oak Slab Bar Top
These are covered by our 14 days return policy, please read our returns policy for our T&C.
These will normally be dispatched within 5 working days
Please note that we will post these as fast as we can.